2-Group POE Adapter Injector Up to 30W of power on 2-pairs
Conforms the IEEE 802.3at standard
PoE Injector Adapter Advantages:
► Transfer the data and power through the existing network, plug-and-play
► Conforms the IEEE 802.3at standard
► 100M or 1000M transmission rate to meet the high-bandwidth network applications
► Up to 30W of power on 2-pairs
► Auto-detect of PoE( IEEE 802.at/af) equipment;
► The input terminal of the AC voltage or DC power supply mode can be selected
► Use PD and PSE power supply equipment together,they can provide both data and
► Power for those not support PoE network equipment
► PD output is 5V/9V/12V etc. voltage (choose one)
Overview
PoE (Power over Ethernet) is a technology where both data and electricity are transferred via Ethernet
cable. A complete PoE system consists of power sourcing equipment (PSE) and powered device (PD)
. PoE uses two idle ones of four twisted pairs to transfer electricity to connect to Internet along with
Ethernet, without additional cabling, providing an effective solution to power supply for deployment of
IP network and WLAN wireless broadband equipment in rigorous network environment where power
wiring is difficult. It is applicable for centralized power supply used for IP monitoring, wireless access
and other applications. PoE+ provides a most cost-benefit solution to the "last-100-meter" broadband
network, available for transfer of various data via network
Application
Technical Indexs
| Standard | IEEE 802.3af, IEEE 802.3at |
| Transfer Data | 10/100M or 10/100/1000Mbps |
| transmission medium | 10 Base-T: Cat3, 4, 5 UTP, ≤100m
100/1000BASE-TX:Cat5 and Up UTP,≤100m |
| output voltage | DC 48V; Two Groups 0.6A,Single Port≤30W |
| Interface | RJ45 |
| power plug: according to requirement |
| indicator | Power and Two Data+Power indicator |
| voltage range | AC 100～240V 50/60Hz |
| power dissipation | Standby 2.8W; FL 60W |
| Dimensions (W X D X H) | 5.79 x 2.28x 1.57 in.(147×58×40mm) (Mounting holes on the other gauge) |
| Weight | About 200g |
| Environment | Operating Temperature: -15℃～+45℃(5℉~113℉) |
| Operating Humidity: 20% ～85％ |
| Storage Temperature -25°C—60°C(-13℉~140℉) |
| Storage Humidity:20% ～90％ |
Orrdering Information
| Model | Decription |
| LNK-PJ202 | 2-Port PoE Adapter, 10/100Mbps, IEEE 802.3af 15.4W |
| LNK-PJ202AT | 2-Port PoE Adapter, 10/100Mbps, IEEE 802.3at 30W |
| LNK-PJ302 | 2-Port PoE Adapter, 10/100/1000Mbps, IEEE 802.3af 15.4W |
| LNK-PJ302AT | 2-Port PoE Adapter, 10/100/1000Mbps, IEEE 802.3at 30W |
Product Tags:
|
|
2-Group POE Adapter Injector Up to 30W of power on 2-pairs Conforms the IEEE 802.3at standard Images
|
